Official 'Diagram of the Hub' and controller wiring diagram documents the exact wire-color pinout for: KAABO throttle connector (orange/blue-1/black-2/empty-3/grey-4/yellow-5/green-6/red-7/white-8), right/left brake-handle 2-core anti-plugs, display 6-core anti-plug (blue-1/black-2/empty-3/grey-4/yellow-5/green-6/red-7/white-8), left/right handlebar turn-signal 2-core and 11-core plugs, a 3-core headlight anti-plug, and the dual-controller (A/B, each 48V20A) to battery/motor wiring including XT60 connectors, main/auxiliary controller connection cable, and the charging port. The manual explicitly lists wiring taboos: internal circuit plugs must be glued, lines must not be left unfixed ('flying lines'), a line must not be welded at a single fixation point only, lines must be protected from sharp edges, and reverse/incorrect-terminal wiring is prohibited. This content is transcribed verbatim from the official manual; no pinout or voltage was inferred or invented.
Fuente oficial: https://cdncloudcart.com/12860/files/doc/mantis-x-user-manual.pdf (tier A). Traducción/paráfrasis fiel del manual oficial; no se ha añadido ningún procedimiento no documentado.